DIY - Installing a New Toilet

DIY - Installing a New Toilet

Installing a new toilet can seem like a daunting task, but with the right tools and guidance, it can be a DIY project that anyone can complete. In this tutorial, we will walk you through the steps of installing a new toilet, from removing the old toilet to connecting the new one.

Materials Needed

Before starting, gather the necessary materials. You will need:

  • New toilet
  • Wax ring
  • Toilet bolts
  • Adjustable wrench
  • Screwdriver
  • Level
  • Putty knife
  • Bucket
  • Towels

Step 1: Remove the Old Toilet

The first step is to remove the old toilet. Turn off the water supply to the toilet by closing the valve behind the toilet. Flush the toilet to remove any remaining water in the tank and bowl. Use a putty knife to remove the caps covering the bolts that secure the toilet to the floor. Unscrew the nuts using an adjustable wrench and lift the toilet off the bolts.

Step 2: Prepare the Toilet Flange

The toilet flange is the pipe fitting that connects the toilet to the drain pipe. Check the condition of the flange and make sure it is securely attached to the floor. Remove any old wax ring and clean the flange thoroughly.

Step 3: Install the Wax Ring

The wax ring is used to seal the toilet to the flange and prevent leaks. Place the wax ring on the flange, making sure it is centered and level.

Step 4: Install the New Toilet

Carefully place the new toilet bowl over the wax ring and align the bolt holes with the flange. Press down firmly to ensure a good seal. Place the toilet bolts into the holes and tighten them by hand. Use a level to check that the toilet is even and adjust the bolts if necessary. Tighten the nuts using an adjustable wrench, being careful not to overtighten and crack the porcelain.

Next, attach the toilet tank to the bowl according to the manufacturer's instructions. Connect the water supply line to the bottom of the tank and turn the valve back on.

Step 5: Test the Toilet

Once the toilet is installed, test it by flushing and checking for leaks. Inspect the connections and tighten any loose bolts or nuts. If everything is in working order, caulk around the base of the toilet to prevent water from seeping underneath.


Installing a new toilet is a DIY project that can save you money and improve the functionality of your bathroom. With the right tools and guidance, anyone can tackle this project. Remember to take your time, follow the manufacturer's instructions, and be careful when handling the toilet to avoid damaging the porcelain. By following these steps, you can have a new toilet installed in no time!

Shop New Toilets on


Shop with us

Back to blog