DIY - Installing a New Showerhead

DIY - Installing a New Showerhead

If you're looking to update your bathroom without spending a lot of money, installing a new showerhead can make a big difference. It's a simple DIY project that doesn't require any special skills or tools. In this guide, we'll walk you through the process step-by-step.

Materials You'll Need

  • New showerhead
  • Adjustable wrench
  • Plumbing tape (also known as Teflon tape)
  • Old towel or rag

Step-by-Step Instructions

  1. Turn off the water supply: Look for the shutoff valve near your shower, and turn it off by turning the handle clockwise.

  2. Remove the old showerhead: Use an adjustable wrench to turn the nut on the shower arm counterclockwise. If the showerhead is difficult to remove, you can use pliers to grip the shower arm while you turn the nut.

  3. Clean the shower arm: Use an old towel or rag to wipe away any residue or debris from the shower arm. This will help ensure a tight seal when you install the new showerhead.

  4. Wrap the threads with plumbing tape: Take a piece of plumbing tape and wrap it around the threads on the shower arm in a clockwise direction. Make sure to wrap the tape tightly, but not too tightly, as this can cause leaks.

  5. Install the new showerhead: Screw the new showerhead onto the shower arm by turning it clockwise. Use the adjustable wrench to tighten it securely, but be careful not to overtighten it.

  6. Turn on the water supply: Turn the shutoff valve near the shower back on by turning the handle counterclockwise. Turn on the shower to test for leaks. If you see any water dripping from the showerhead or the connection to the shower arm, turn off the water supply again and tighten the connection with the adjustable wrench.

      Tips and Tricks

      • When choosing a new showerhead, look for one that is easy to clean and has a good water flow rate.
      • If your showerhead is clogged with mineral buildup, you can soak it in vinegar overnight to remove the buildup.
      • If you're having trouble removing the old showerhead, try using a penetrating oil like WD-40 to loosen the nut.
      • If you're installing a handheld showerhead, you may need to install a bracket or holder for the showerhead to rest in.


      Installing a new showerhead is a simple and easy DIY project that can give your bathroom a fresh new look. With the right tools and materials, you can complete the project in just a few minutes. Just remember to turn off the water supply, clean the shower arm, use plumbing tape, and tighten the new showerhead securely to prevent leaks. With these steps and tips, you'll be able to enjoy a new showerhead in no time!

      Shop Showerheads on


      Shop with us

      Back to blog